3. Position the left exit guide plate [2] as shown, then attach it with its magnet.
4. Do a test print to confirm that the paper exits the main machine straightly and smoothly between the
guide plates.
Printer Check
Do a test print.
1. [Menu]
2. [
] or [
]> "List/Test Print"> [OK].
3. [
]> "Config. Page"> [OK]> "Config. Page Printing…"
If the printed text is not positioned correctly, do SP2902 and select Pattern 11. For more about adjustments,
see p.180 "SP Adjustments".
Paper Roll Adjustments (Tray 1, Tray 2)
SP No.
Name
1001-1
Leading Edge Registration – 1st Roll
1001-2
Leading Edge Registration – 2nd Roll
1002-1
Side-to-Side Registration – 1st Roll
1002-2
Side-to-Side Registration – 2nd Roll
Paper Cassette Adjustments (Tray 3)
Main Machine Installation (G180)
41
1
Summary of Contents for Neptune-P1
