Ricoh Neptune-P1, Service Manual

Page: 310 / 457

16
The storing of the certification has failed, and the GW URL is being notified of the
failure of this event.
17
The certification update request has been received from the GW URL, the GW
URL was notified of the results of the update after it was completed, but a
certification error has been received, and the rescue certification is being
recorded.
18
The rescue certification of No. 17 has been recorded, and the GW URL is being
notified of the failure of the certification update.
68
Cer Abnml Cause Certification Error
Displays a number code that describes the reason for the notification requesting the
certification update.
0 Normal. No request for certification update in progress.
1 Certification update in progress due to expiration of certification.
2 SSL error has been issued after the certification has expired.
3 There has been a shift from a common to individual certification.
4 There has been a common certification without ID2.
5 No certification has been issued.
6 GW URL does not exist.
69
Cer Updt Reg ID Certification Update: Requested ID
The ID of the request for certification.
83
Firm Updating Firmware Updating
Displays the status of the firmware update.
84
Firm Up Flg No HDD Firmware Updating: No HDD Unit
This setting determines if the firmware can be updated, even without the HDD installed.
85
Firm Up User Conf Firmware Update with User Colnfirmation
This SP setting determines if the operator can check the previous version of the firmware
before the firmware update execution. If the option to check the previous version is selected,
a notification is sent to the system manager and the firmware update is done with the firmware
files from the URL.
SP5-xxx Mode
309
5