Ricoh Neptune-P1, Service Manual

Page: 247 / 457

SP Table Key
Notation What it means
[range/default step]
Example: [-9 to +9/+3.0/0.1 mm step]. Setting can be adjusted in the
range ±9, value reset to +3.0 after and NVRAM reset, and the value can
be changed in 0.1 mm steps with each key push.
DFU
“Design or Factory Use”. Do not change this value. The factory default
setting provides optimum performance.
Not Used
These SP's appear in the SP mode menus but these codes are not used
because:
• Currently the feature is not available for the main machine, or its use
has been discontinued.
• The SP is intended for use with a peripheral that is currently under
development but not available at this time.
Note: Executing these SP's has no effect on operation of the main machine
or any peripheral device.
Japan Only This feature or item is for Japan only. Do not change this value.
• Always turn the machine power off/on after changing an SP setting.
5. Service Tables
246
5