Ricoh Neptune-P1, Service Manual

Page: 367 / 457

807x 3 3 Pages 807x 10 101 to 300 Pages
807x 4 4 Pages 807x 11 301 to 500 Pages
807x 5 5 Pages 807x 12 501 to 700 Pages
807x 6 6 to 10 Pages 807x 13 701 to 1000 Pages
807x 7 11 to 20 Pages 807x 14 1001 to Pages
• Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
• If a job is paused and re-started, it counts as one job.
• If the finisher runs out of staples during a print and staple job, then the job is counted at the time the
error occurs.
• When printing the first page of a job from within the document server screen, the page is counted.
8381 T:Total PrtPGS These SP's count the number of pages printed by the
operator. The counter for the application used for storing
the pages increments.
[0 to 99 999 999/ 0 / 1]
8384 P:Total PrtPGS
8387 O:Total PrtPGS
838x 1 Field Number Total number of copies (regardless of size)
838x 2 Length (High) Total length
838x 3 Length (Low) Total length
838x 4 Area (High) Total area coverage
838x 5 Area (Low) Total area coverage
Note:
• The values for "Length" are displayed in mm. If a "Length" reading is "42126" this
is 42,126 mm (42.126 m).
• The values for "Area" are displayed as mm
2
. If an "Area" reading is "33213257"
this is 33,213,257 mm
2
(33,213.257 m
2
).
• The counts for the "Length" and "Area" start with "Low". Once the count exceeds
the width of the field on the display the "Low" field will reset to "0" and the count
overflows to the "High" SP codes. (This is necessary because the fields of the "Low"
SP codes are limited to 8 digits and not wide enough to display the full reading
for a reading larger than 8 digits.)
• Always check the "Low" SP first. If the "Low" display is zero, check the "High" field.
5. Service Tables
366
5