10. [Execute] to print the pattern. After printing, you will see "Completed".
• The pattern selection is reset to zero (default) as soon as the pattern has printed. The pattern must
be selected for each printing.
Step 1: Erase Margins
Set these SPs to “5” to make measurement easier:
SP
Set To:
Comments
2101-1
5
Print Erase Margin – Leading Edge
2101-2
5
Print Erase Margin – Trailing Edge
2101-3
5
Print Erase Margin – Left Edge
2101-4
5
Print Erase Margin – Right Edge
Step 2: Printer: Leading Edge, Side-to-Side Registration
1. Print Test Pattern 2 for each paper feed station.
• Bypass
• Roll Feeder Roll 1
• Roll Feeder Roll 2
• Paper Cassette
2. Measure the gaps for the leading edge and side-to-side registration.
SP Adjustments
183
3
Summary of Contents for Neptune-P1
