Ricoh Neptune-P1, Service Manual

Page: 163 / 457

8. Main power switch connector [F] (  x 1,  x 1).
9. Fusing motor [G] (  x 1,  x 4)
Reinstallation
If it is difficult to reconnect the connector at the rear of the motor when you install the motor mount
plate:
• Remove the rear cover.
• At the left rear corner of the main machine, open two or three harness clamps to release the
motor harnesses. This will decrease the tension in the harnesses.
10. Remove the gear cover plate and motor mount plate. (See previous pages.)
11. Main motor [H] (
 x 2, drive belts x 2,  x 4)
3. Replacement and Adjustment
162
3