Ricoh Neptune-P1, Service Manual

Page: 340 / 457

7 Not used ---
6 Not used ---
5 Not used ---
4 Not used ---
3 Transport JG door sensor (F) 0: Close, 1: Open
2 Transport JG door sensor (U) 0: Close, 1: Open
1 Transport JG door sensor (R) 0: Close, 1: Open
0 Cross fold door sensor (R) 0: Close, 1: Open
14 Door2:XF Door 2: Cross Folder (Not Used)
Bit Input Status
7 Not used ---
6 Not used ---
5 Not used ---
4 Transport JG door microswitch (F) 0: Close, 1: Open
3 Cross horizontal microswitch 1 0: Close, 1: Open
2 Cross horizontal microswitch 2 0: Close, 1: Open
1 Inverter door microswitch 0: Close, 1: Open
0 Inverter door microswitch 0: Close, 1: Open
6118 FU Output Chk Folder Output Check
Use this SP to switch on the motors, clutches, and solenoids of the Folder unit B889 to test their
operation.
Important: After switching on a motor, clutch, or solenoid, be sure to switch it off after you finish
your work.
1 TrptM:Fwd:FF Transport Motor: Fwd: Fan Folder
2 BpFeedCL:FF Bypass Feed Clutch: Fan Folder
3 PprEnt CL:FF Paper Entrance Clutch: Fan Folder
SP6-xxx Peripherals
339
5