Manual Feed Mechanism
The user puts a cut sheet [A] on the manual feed table (also called the "bypass tray"). The paper set sensor
[B] detects the leading edge of the sheet. This switches on the drum motor, main motor, and registration
clutch.
The registration clutch engages the registration roller [C] which feeds the sheet.
The registration sensor [D] detects the edge of the sheet and the registration clutch switches off for 2 seconds.
This gives the user time to adjust the position of the paper to make it straight. The 2-second interval can be
adjusted with SP1911 (By-Pass Feed Start Timing Adj.).
Paper Feed and Registration
405
6
Summary of Contents for Neptune-P1
