Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 120 / 462

3. When threading roll-feed forms, thread the forms from the roll feeder to the
forms input area, as follows:
a.
Thread the forms under the lower roller
(1)
and between the bar
(2)
and the
machine frame
(3)
.
b. Raise the pressure rollers (4) and thread the forms over the urge unit driver
roll (5) . Leave the pressure rollers (4) open.
c. Thread the forms under the flap (6) and into the forms input area.
d. Lower the pressure rollers (4) .
4. Thread the forms from the forms input area and up to the splicing table, as
follows:
a. Open the tension gate (2) .
b. Thread the forms through the tension bars and rollers (1) , leaving the gate
(2) and roller open.
c. Thread the forms over the forms guide (3) and across the splicing table (4) .
d.
Thread the forms just past the tractorless pressure roller
(5)
and lower the
roller onto the paper.
g6am0025
g6am0026
5
1
6
4
3
2
106
Operating the InfoPrint 4100