Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 232 / 462

Table 13. Operator message codes (continued)
Code Description Reference
0131 Tension arm down
v
See “Checking the tension arm” on
page 147.
v
See “Clearing forms jams” on page
230.
0132 Tension arm up
0133 Skew error See “Clearing forms jams” on page 230.
0134 Fuser wrap
0184 Transfer station forms jam (Auto
Load)
0185 Upper fuser forms jam (Auto Load)
018C Toner mark not sensed
v
Check to see if the verification mark
was printed correctly.
v
See “Aligning tractored forms” on
page 155.
v
See “Aligning tractorless forms” on
page 163.
018D Registration mark not sensed
v
Check to see if the verification mark
was printed correctly.
v
See “Aligning tractored forms” on
page 155.
v
See “Aligning tractorless forms” on
page 163.
018E The Mark Sensor is not Ready
v
Rotate the upper mark sensor
assembly down to the closed position.
v
If the upper mark sensor assembly is
in the closed position, do the
following:
1. Shut down the system.
2. Power off the system.
3. Power on and retry the operation.
If this does not fix the problem, call for
service.
0191 Upper tractor forms jam (Auto Load) See “Clearing forms jams” on page 230.
0196 Splice lever down (Auto Load) See “Splicing tractored forms” on page
150.
0198 End-of-forms (Auto Load)
v Splice or load new forms.
v See “Splicing tractored forms” on page
150.
v
See “Loading forms” on page 69.
218
Operating the InfoPrint 4100