Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 30 / 462

Moveable Rear Guide Pins (1) You can change the position of the guide pins to match the form size, as
indicated by the form-width measurements marked on the splicing
table.
Web Support Guides Release Lever (2) Releases the plate that covers the guide pins at the front of the splicing
station.
Splice Lever (Vacuum Control) (3) Activates the splicing table vacuum. When the splice lever is up ,
vacuum is present, which holds splicing tape and forms on the splicing
table. When the splice lever is
down , no vacuum is present on the
splicing table.
Tape Slot (4) Holds splicing tape in place during splicing. When the splice lever is
down , the splicing table vacuum holds the splicing tape on the slot.
Moveable Rear Guide (5) Hold rear tractor holes of the forms during splicing.
About the transfer station
The Transfer Station Control lever (1) , Tractor Control knob (2) and the Transfer
Station Gap Lever (3) are on the transfer station frame.
c0tu006
1
2
3
Figure 14. Transfer station control lever, tractor control knob, and Transfer Station Gap Lever
16
Operating the InfoPrint 4100