Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 211 / 462

Note: Figure 85 on page 196 shows side verify marks on tractored paper. The
marks are in the same location on tractorless paper.
Figure 86 shows the adjustments you can make to the size and placement of
registration marks relative to the front and back of the printer. Use the Edit
window for each selected mark to make adjustments.
1. Alignment
value set to
Towards Back of Printer
positions the mark at the back
edge of the form (the back edge of the mark is aligned with the back edge of
the form). Use the
Offset field to adjust the alignment from this starting
position.
2. Alignment value set to Centered positions the mark in the center of the form
(the center of the mark is aligned with the center of the form). Use the Offset
field to adjust the alignment from this starting position.
3. Alignment value set to Towards Front of Printer positions the mark at the
front edge of the form (the front edge of the mark is aligned with the front
edge of the form). Use the
Offset field to adjust the alignment from this
starting position.
4. Mark Distance From the Top of Form
specifies the placement of the mark in
the paper-feed direction, relative to the top of the form (the distance from the
top edge of the form to the top edge of the mark).
5. Mark Height specifies the height of the mark.
6. Mark Width specifies the width of the mark.
7. Offset specifies the placement of the mark in the across paper-feed direction,
relative to the alignment starting position specified in Alignment .
Note: When printing on tractorless forms, the registration mark must be
positioned so that it can be read by the toner mark/side verify sensor. For this
reason, you should specify a value for
Offset that will restrict the placement of
the mark to ensure that it will be read by the sensor.
Note:
Figure 86 shows registration marks on tractored paper. The marks are in the
same location on tractorless paper.
g5aud001
1
2
3
6
7
4
5
Paper Feed Direction
Scan Direction
T
railing Edge
Leading Edge -
T
op of F
o
rm
Front of Printer
Back of Printer
Page Length
Figure 86. Size and placement of registration marks
Chapter 5. Working with forms
197