v
For forms that are 3 or 3-1/3 inches - set the forms length to three times the
length of the actual form (at the perforation to perforation distance) as it is
folded before printing.
4.
If the perforation is not aligned correctly, do the following:
Note:
Hold the tension arm so that it stays aligned with the blue mark on the
guide notch while you do the following steps. Otherwise, the 079A
CHECK
TENSION ARM 079A
message appears when you turn on the forms path vacuum,
and you must do the Check Tension Arm procedure (see “Checking the tension
arm” on page 147.
a.
Press the vacuum push button. The
Vacuum-Off
warning indicator flashes
and then stays lit.
b.
Use the
Forms Feed Forward
key on the printer control panel to adjust the
position of the perforation. Only the Forward key works with the tension
arm held down. Adjust the perforation forward as far as necessary.
c.
Press the vacuum push button. The
Vacuum-Off
warning indicator flashes
and then stays off.
5.
Ensure that the
Forms Set
indicator on the printer control panel is set to match
the fold direction of the fold on the transfer station lower tractors. If it is not,
press the correct
Forms Set
key.
Note:
This step is required only if you are using fan-fold forms, and the forms
are going to the stacker.
av9mc547
Toner
Mark
Reverse
Auto Load
Forms Set
Forms Feed
Load
STOP
Forward
IC3U0032
Figure 52. Forms Feed Forward key on the printer control panel
136
Operating the InfoPrint 4100
Summary of Contents for InfoPrint 4100 TD3
