Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 29 / 462

Table 3. Printer control panel keys (continued)
Forms Feed Forward
Forward
R4CO0100
Moves the forms toward the transfer station and forms
exit area. Unfused forms in the forms path between the
transfer station and the fuser are not fused.
Forms Feed Reverse
Reverse
R4CO0101
Moves the forms away from the transfer station into the
input bin. This control is active when the Tension Arm is
in the correct position.
Toner Mark
Toner
Mark
IC3U0031
Allows you to reset errors that occur while aligning
tractorless forms.
About the splicing table
Note: The Splicing Table is not available on all models.
The
Web Support Guides Release
lever
(2)
,
Splice
lever
(3)
, moveable rear guide
(5) , moveable rear guide pins (1) and tape slot (4) are on the splicing table in the
input area. Splicing forms together allows a job to continue with a new supply of
the same type forms without reloading any forms.
Selecting This Control: Does This:
av9mc557
1
2
3
4
5
Figure 13. Splicing table
Chapter 1. Introducing the printer
15