Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 304 / 462

2. Clear the forms, if possible, from directly under the developer mix drain hose
at the right side of the forms input area.
v
If you are using boxed fan-fold forms, slide the box of forms as far to the
left (toward the forms exit area of the printer) of the forms input area as
possible.
v
If you are using a preprocessing device supplying forms under the printer
up into the forms input area, create enough slack in the forms supply so
that you can move the forms to the far left side of the forms input area.
Spread paper towels on top of the forms on the floor of the forms input
area.
3. Remove the cap from an empty developer mix bottle, and put the bottle in the
forms input area, directly under the developer mix drain hose.
4. Pull out the developer drain hose, keeping the capped end pointing up (so
that any developer mix in the hose from the last change does not spill).
Remove the cap from the hose.
290
Operating the InfoPrint 4100