Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 225 / 462

v
Paper Feed Direction provides options to specify the placement of the mark
relative to the top of the form and the location of the page number (before or
after the mark).
v
Use Tractorless Mark for Side Verify provides the option to select Yes to use
the tractorless mark for side verification or No to print the normal mark for
side verification.
Note: When Same Side Printing is set to Yes for duplex data , the side verify
mark is automatically positioned to an equivalent position on the opposite side
of the page so that the mark can be read by the sensor. This could change the
mark alignment position and its offset value in the
Across Paper Feed
Direction .
4.
Select
OK
to save your changes.
Related information:
“Using the Dual Toner Mark/Side Verify Sensor (FC 4570/9570)” on page 407
Using registration marks for tractorless printing
About this task
Do this procedure to define or specify registration marks used for tractorless
printing. Use the Edit window to change the size and location of the mark.
When using the tractorless registration mark, a short line is printed to help align
the form when tractorless paper is used. Since there are no tractor holes and there
may or may not be perforations in the paper, these marks help the printer find the
top of each form. Front and back sides of duplexed pages can be aligned in this
way.
For Printer 1, when printing in Duplex mode, tractorless marks must be preprinted
on the form and enabled using the Form Settings panel (
Forms
→
Form Settings ).
Select Yes for Tractorless and select Marks... to display the Marks window. In the
Marks window, select Yes for Preprinted Registration Marks .
g5aud152
Preprinted registration
mark for Printer 1
T
railing Edge
Leading
Edge
Front of Printer
Back of Printer
Registration mark
printed by Printer 1
for Printer 2
Figure 87. Placement of registration marks for tractorless forms
Chapter 5. Working with forms
211