Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 128 / 462

3. Open the gate by pushing in (4) and pulling up and out on (5) .
4. Engage the tractorless pressure roller (6) by moving it into the down position.
5. Turn off the forms path vacuum by pressing the Vacuum Push Button in the
forms input area. The
Vacuum-Off
warning indicator flashes and then stays lit.
6. Use the Forms Feed keys on the printer control panel to feed the forms over
the tension arm and into the preheat platen area, guiding them with your other
hand. Keep feeding the forms until the scuff rollers grab them and feeds them
into the forms exit area. Continue feeding the forms until there is enough
length to allow you to splice the forms before feeding them into the post
processor, or until there is enough length to reach the post processor.
g6am0020
1
2
6
4
3
5
Toner
Mark
Reverse
Auto Load Forms Set Forms Feed
Load STOP Forward
IC3U0032
Figure 45. Forms Feed button
114
Operating the InfoPrint 4100