Ricoh InfoPrint 4100 TD3, Operating Manual

Page: 202 / 462

b. If the fold is a down fold, the next page printed is a front-facing page.
2. If the fold direction is the way you want
, do the following to start or continue
a print job:
a. If necessary, select Next is Back . The message on the panel changes to Next
is Back , and the Next is Back button is grayed out. Selecting the Next is
Front button changes the message and the buttons back to what they were
originally.
b. Select Close .
3. If the fold direction is not the way you want , do the following to start or
continue a print job:
a. Advance the forms by one page by using one of the following methods:
v On the printer operator panel or the Align Forms panel, select NPRO .
v
From the touch panel, select Forms
→
Advance Paper (NPRO) and select
Advance One Page .
b.
If necessary, select
Next is Back
to set the panel message text to agree with
the fold direction. The message on the panel changes to Next is Back . The
Next is Back button is grayed out.
c. Select Close .
Checking forms alignment
About this task
Do this procedure to check forms alignment. Do this procedure when you see a
CHECK FORMS ALIGNMENT message or whenever you load, splice, or adjust forms.
Procedure:
Procedure
1. At the lower transfer station tractors, ensure that the forms perforation (1) is
aligned with the correct forms length on the tractor scale (4) .
c0tu019
1
5
5
4
2
3
Figure 81. Forms fold at the alignment guide
188
Operating the InfoPrint 4100