v
Load the correct settings for the new forms. See “Loading the correct forms
settings” on page 144.
v
Start the printer.
Feeding new forms through the printer
About this task
Do this procedure to splice new forms to the old forms and then feed the new
forms through the printer. You can splice the new forms you want to use, tractored
or tractorless, to the old forms. Doing this allows you to switch forms without
manually reloading the printer.
Procedure:
Procedure
1.
Splice a new supply of forms to the trailing edge of the old supply before it
enters Printer 1. The forms will most likely be of a different size, so line up the
forms at the front edge (the edge closest to the operator).
2.
Open all paper guides, tractor units, and feeding units to their widest position
in both Printer 1 and Printer 2:
v
Use the
Tractor Control Knob (6)
to adjust the tractors to the widest possible
width. Use the scale just to the left of the tractor covers.
v
Adjust the tractorless feeding unit (drive roller, pressure roller, and vacuum
belt unit slots
(1)
) to the widest position.
v
Adjust all tractor units to the outermost position. To adjust a unit, press the
blue button
(5)
while grasping the unit and slide the unit to the outermost
position.
Note:
Make sure the tractor slot
(2)
is in the Tractorless Feed mode
(3)
.
Position
(4)
is Tractor Feed mode.
138
Operating the InfoPrint 4100
Summary of Contents for InfoPrint 4100 TD3
