Ricoh Aficio MP 6000 Operating Instructions Manual Download

Page: 453 / 907

Appendix

198

❖

Front Cover, Back Cover

• If Blank mode is selected, the cover will not be counted as a copy.
• Front and back covers are two-sided copied depending on the settings

made in Display Time in Cover Sheet Tray of User Tools (System Settings).
• At Mode Selected… Depends on the setting done from Cover Sheet

Tray.

• Full Time… Depends on the setting done from Paper Type.

See “Tray Paper Settings”, General Settings Guide.

❖

Designate

• When “Combine (1 Sided

→

2 Sided)” has been selected, specified pages

will always be copied on the front of copies in the same way as in Chapters
mode.

❖

Slip sheet

• If you do not copy onto slip sheets, they are excluded from the number of

copies counted.

❖

Copy Face Up

• Copies are delivered face down (in the same order as the original) if Thin

Paper, Plain Paper 1, Plain Paper 2, Middle Thick, or Thick Paper 1 is specified.

• Copies are delivered face up (in reverse order of the original) if Thick Pa-

per 2 or Thick Paper 3 is specified.

• Tab stock is delivered face down regardless of its paper weight.

Summary of Contents for Aficio MP 6000












































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands

Ricoh Aficio MP 6000, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands