Ricoh Aficio MP 6000 Operating Instructions Manual Download

Page: 186 / 907

Messages Displayed When Using the Scanner Function

Error has oc-

curred in the

scanner driver.

An error has occurred in
the driver.

• Check whether the network cable is

connected correctly to the client
computer.

• Check whether the Ethernet board

of the client computer is recognized
correctly by Windows.

• Check whether the client computer

can use the TCP/IP protocol.

Communication er-

ror has occurred

on the network.

A communication error
has occurred on the net-
work.

Check whether the client computer can
use the TCP/IP protocol.

Scanner is in use

for other func-

tion. Please

wait.

A function of the machine
other than the scanner
function is being used
such as the copier func-
tion.

Wait for a while and reconnect.

Insufficient mem-

ory. Close all

other applica-

tions, then re-

start scanning.

Memory is insufficient.

• Close all the unnecessary applica-

tions running on the client compu-
ter.

• Uninstall the TWAIN driver, and

then reinstall it after restarting the
computer.

No User Code is

registered. Con-

sult your system

administrator.

Access is restricted with
user codes.

Contact the administrator of the ma-
chine.

Any of Login User

Name, Login Pass-

word or Driver

Encryption Key is

incorrect.

The entered login user
name, password, or driv-
er encryption key was
invalid.

• Check the login user name, login

password, and driver encryption
key.

• Permission to use this function has

not been granted. Contact the ad-
ministrator.

Message

Cause

Solution

Summary of Contents for Aficio MP 6000












































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands

Ricoh Aficio MP 6000, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands