![background image](http://html.mh-extra.com/html/raven/omniseed-viper-pro/omniseed-viper-pro_calibration-and-operation-manual_788947213.webp)
9
Manual No. 016-3001-015 Rev. C
201
Remote Calibration Console
Cal Weight
The Metered Weight Page will display automatically at the end of the catch test procedure. This screen
displays the number of metering roller revolutions detected during the catch test and allows the operator to
enter the weight of product dispensed to calibrate the OmniSeed system. To enter the cal weight value:
1.
Use the
Left
and
Right
keys to move the cursor below the bin cal weight value to the first digit of the
measured cal weight and press the
Enter
key.
2.
Press the
INC
or
DEC
keys to set the appropriate value for the selected digit and press the
Enter
key to set
the value.
3.
Repeat the above procedure to set the remaining cal weight digits up to two decimal places.
4.
To program the cal weight value, press the
Right
key to move the cursor past the last decimal place in the
cal weight value and press the
Send
key.
The remote tank console will send the entered cal weight value to the appropriate control node and will
return to the bin calibration screen.
5.
Press the
Exit
key to return to the bin selection screen.
Product or Cal
Weight Value
Send Key
Summary of Contents for OmniSeed Viper Pro
