manualshive.com logo in svg

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Share
Download
Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 144

Chapter 6

132

OmniSeed™ Viper Pro™ Installation & Operation Manual

Swath Number

The Swath Number displays the number of passes completed by the vehicle.

Alternate Swath Pattern Button

The Alternate Swath Pattern Button displays the alternate guidance pattern available for the current job.

Alternate View Button

The Alternate View button allows the operator to toggle back and forth from ‘Down Field View’ to ‘Bird’s Eye 
View.’ The button shows the alternate view that will be displayed when the button is selected.

Bright Button

The Bright button displays only if the Guidance system is configured to use an external light bar.

Touch the Bright button to increase the brightness of the external light bar. Viper will display the current 
intensity level of the light bar display each time the button is selected.

Dim Button

The Dim button displays only if the Guidance system is configured to use an external light bar.

Touch the Dim button to decrease the brightness of the external light bar. Viper will display the current intensity 
level of the light bar display each time the button is selected.

Guidance Menu Icon

The Guidance Menu icon displays if additional options are available for the guidance pattern currently in use. 
Touch this icon to access special features, save, or modify the current guidance path.

Note:

The Guidance Menu icon will not display if no additional options are available for the active 
guidance pattern.

Zoom Level

Select the Zoom In or Zoom Out icons to change the Guidance display for personal preferences or review the 
coverage map.

Vehicle Indicator

The Vehicle Icon provides an indication of where the vehicle is positioned with respect to the overall field. The 
tip of the arrow represents the antenna position of the vehicle and where it is in reference to the swath line, 
field, etc.

Save A-B Button

The Save A-B button allows the operator to save an A-B line once the line has been set using the Set A and 
Set B buttons or if the A-B line has been re-calibrated or reset.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands