manualshive.com logo in svg

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Share
Download
Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 92

Chapter 4

80

OmniSeed™ Viper Pro™ Installation & Operation Manual

Product Control Status Display

The Product Control Status of the CAN system is displayed in this area.

The status indicator displays red if communication with the CANbus system is not available. The status area 
will display in yellow symbol if the Viper Pro detects a problem with the CANbus system such as an alarm 
condition. The status indicator will display in green during normal operation.

Touch the Product Control Status or indicator to view the CAN Controller Status screen and access the Node 
Setup screens when connected to a Raven CANbus system.

Note:

See the Controller Status Screen section on page 84 for an overview of the settings and 
information areas displayed on the CAN Controller Status screen. Review Chapter 7, Advanced 
Settings and Features, for more information on the Product Control status and using the CAN 
Controller Status screens on the Viper Pro field computer.

SmarTrax Status Area and Steering Indicator

If an optional SmarTrax system is installed with the Viper Pro, the status of the system will be displayed in this 
area.

If the SmarTrax system is engaged, the steering indicator will display a green steering wheel with the ‘A’ as 
shown above. When the SmarTrax system is disengaged, the steering wheel will be grey and no A will appear.

Note:

Refer to the SmarTrax Calibration and Operation Manual for additional information.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands