manualshive.com logo in svg

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Share
Download
Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 234

Chapter 11

222

OmniSeed™ Viper Pro™ Installation & Operation Manual

Automatic File Maintenance

Note:

Do not use the Automatic File Maintenance feature to create reports for a Slingshot 
account

.

The Automatic File Maintenance feature does not export the types to a USB flash drive necessary 
for creating Slingshot reports and will remove job data from the Viper Pro. Job data transferred 
using the Automatic File Maintenance feature cannot be reinstalled onto the field computer for 
export to Slingshot. Refer to the USB File Transfer and Advanced File Maintenance section on 
page 219 for instructions on outputting the necessary file types.

The automatic file maintenance feature will automatically perform the following steps:

1.

Move all report files to the USB drive.

2.

Delete all existing job files from Viper Pro internal storage.

Note:

All field boundaries, saved A-B lines, automatic section control templates, street and prescription 
maps will be maintained on the internal storage.

To perform automatic File Maintenance:

1.

Touch 

Menu

 on the main screen.

2.

Select 

File Maint.

 from the list of menu options.

3.

Select 

Automatic File Maintenance

 from the list of file maintenance options. The following warning screen 

will display.

Touch 

OK

 to download the report files from the Viper Pro internal storage and delete associated job files from 

the Viper Pro or 

Cancel

 to abort the downloading of report files.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands