manualshive.com logo in svg

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Share
Download
Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 235

11

Manual No. 016-3001-015 Rev. C

223

File Maintenance and Editing Reports

Clone or Restore Settings

The Clone or Restore Settings feature can be used to save all settings and files from the Viper Pro field 
computer to external memory. These clones can then be reloaded to restore settings to the same Viper Pro or 
transferred to another Viper Pro.

Touch the 

Clone or Restore Settings

 button to view the following display.

If a clone has previously been created, select the file name from the list and touch Restore Clone to restore the 
selected clone on the Viper Pro. To delete a clone, select the file name and touch Delete Clone to remove the 
selected clone.

Touch the Create Clone button to save the Viper Pro settings to the selected file. The following screen will be 
displayed.

Enter a name for the clone in the Clone Name field along the top of the screen. Select the “Include Job Files” 
option to include the current job files located on the Viper Pro internal memory with the clone. Once finished, 
touch the OK button to create the clone.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands