manualshive.com logo in svg

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Share
Download
Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 232

Chapter 11

220

OmniSeed™ Viper Pro™ Installation & Operation Manual

Selecting an Operation to Perform

5.

Once the type of file is selected, the Select Operation to Perform selection displays. Select:

•

Copy - Makes a copy of the selected file on the destination storage location. Copied file is 
retained on the source storage location.

•

Delete - Deletes the selected files from the source storage location.

•

Move - Move the file from the source storage location to the destination storage location. The 
selected file on the source storage location is deleted.

•

Export - Select the export option to transfer a job data package .zip file to the connected USB 
flash drive. The file will be transferred to the RDE Outbox folder and may then be transferred to 
the Slingshot web site via a home or office PC.

Note:

The Export operation will only be available with job files.

Selecting Source/Destination

6.

Select the source location of the files on which the selected operation will be performed. For the Copy and 
Move operations, the destination is also listed.

Selecting Associated File Actions

7.

Some file types may be associated with a job file on the Viper Pro. If job files will be deleted, the operator 
must choose what action to perform on files associated with the job file being deleted.

Note:

Deleting job files is the only condition which associated file actions must be selected.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands