Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 136

Page: 136 / 308

Chapter 5

124

OmniSeed™ Viper Pro™ Installation & Operation Manual

18.

After the last ingredient in the chemical mixture is entered, touch the

button. The following screen will be

displayed.

19.

Select the

View

button to review the entered product mixture information.

Note:

Refer to the Single Color Coverage Map section on page 123 for information on the “1 Color
Coverage Map” option.

20.

Verify that the correct mixture information has been entered and touch the

Next

button to display the Report

Notes Information screen.

Report Notes Information

21.

Use the Report Notes screen to enter any additional notes for the job report.

22.

Use the

Prev

and

Next

buttons as necessary to review and modify the job report information before

touching

to accept the displayed information and return to the Viper Pro main screen.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Search results

Summary of Contents for OmniSeed Viper Pro

Reviews:

Brands by name

Popular brands

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Search results

Summary of Contents for OmniSeed Viper Pro

Reviews:

Brands by name

Popular brands