manualshive.com logo in svg

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Share
Download
Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 117

5

Manual No. 016-3001-015 Rev. C

105

Using the OmniSeed Viper Pro System

Tabs

The tabs displayed along the right side of the screen allow the vehicle operator to select the information 
displayed in the map area. The tabs may be used during field operations to toggle coverage, scouting or 
guidance information at any time and can be used to help the vehicle operator manage the various operations 
and systems during an application.

Note:

When a job is not currently in progress on the Viper Pro field computer, the main tab will display all 
accessible information. The other tabs will be available only when a job is in progress. Some tabs 
may not be available unless an optional feature or hardware has been purchased and installed.

Main Tab

The main tab is only available when a job is not in progress on the Viper Pro. This tab displays county street 
maps (if available) to help the operator locate fields or areas for product application and any saved field 
boundary features currently stored on the Viper Pro internal memory.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands