Raven OmniSeed Viper Pro Calibration & Operation Manual Download Page 294

Page: 294 / 308

Appendix H

282

OmniSeed™ Viper Pro™ Installation & Operation Manual

The following icons may be displayed in the wireless status area:

The wireless status symbols also display the file transfer status for any files to or from the Viper Pro field
computer.

Note:

When the

symbols are displayed, touching the Communication Status icon will

display the Connection Status tab on the Wireless Status screen. Touching the status icon at any
other time will display the Site Information tab.

No Device Connected -

No supported wireless device is connected to the ethernet port on

the Viper Pro. This icon is also displayed if wireless communication is unavailable or has been
lost.

Communication OK -

The status of wireless communication is good and no errors or alarms

are present.

Communication Error -

An error has occurred with wireless communication or during a file

transfer.

Communication Lost or Unavailable -

This icon will be displayed if the registration process

has not been successfully completed.

Sync In Progress -

The blue arrow symbol is displayed on the wireless status icon while the

Viper Pro and the Slingshot site are synchronizing.

Files Received -

The envelope symbol is displayed on the wireless status icon when files

have been received by the field computer. When this symbol is displayed, touch the icon to
display the File Manager tab.

Summary of Contents for OmniSeed Viper Pro





















































































































































































































































































































Search results

Summary of Contents for OmniSeed Viper Pro

Reviews:

Brands by name

Popular brands

Raven OmniSeed Viper Pro, Calibration & Operation Manual

Search results

Summary of Contents for OmniSeed Viper Pro

Reviews:

Brands by name

Popular brands