Raritan PX3TS, User Manual

Page: 822 / 842

Appendix J: Integration
798
To turn an outlet off:
1. Click Off next to the outlet you want to power off.
2. Click OK on the Power Off dialog.
3. Click OK on the Power Off confirmation dialog. The outlet will be
turned off and its state will be displayed as 'off'.
To cycle the power of an outlet:
1. Click Cycle next to the outlet you want to cycle. The Power Cycle Port
dialog opens.
2. Click OK. The outlet will then cycle (note that this may take a few
seconds).
3. Once the cycling is complete the dialog will open. Click OK to close
the dialog.
Dominion KSX II, SX or SX II Configuration
Raritan PX3TS support the integration with Raritan's serial access
products - Dominion KSX II, Dominion SX and Dominion SX II.
Cables used for connecting the PX3TS to different Dominion access
products are different.

KSX II - a standard network patch cable (CAT5 or higher)

SX - a CSCSPCS cable

SX II - a CSCSPCS cable
Note: To only access the CLI of the PX3TS via SX / SX II, treat the PX3TS
as a serial device by connecting SX /SX II to the PDU's serial port instead
of the FEATURE port.
For more information on these Dominion serial access product, refer to:

KSX II, SX or SX II User Guide on the
Support page
(
)

KSX II, SX or SX II Online Help on the
Product Online Help page
( )
Dominion KSX II
After connecting a Dominion KSX II to the Raritan PDU, you can monitor
the PDU and even control its outlets if the PDU is an outlet-switching
capable model.