Raritan PX3TS, User Manual

Page: 148 / 842

Chapter 5: Using the PX3TS
124

When the selected outlet has been turned off, 'Switch On'
replaces the option of 'Switch Off'.
6. Press or to select the desired option, and press .

Switch Off: Turn off the outlet.

Switch On: Turn on the outlet.

Cycle: Power cycle the outlet. The outlet is turned off and then
on.
7. A confirmation message appears. Press
or to select Yes
or No, and then press .

Yes: Confirm the operation.

No: Abort the operation.
8. Verify that the selected outlet is switched on or off, depending on the
option you selected in the above step.

Check the outlet state shown on the LCD display. See step 4.

Check the outlet LED. A green LED indicates that the outlet is
turned off, and a red LED indicates that the outlet is turned on.
9. To return to the Main Menu, press several times until the Main
Menu is shown.
Peripherals
If there are no Raritan environmental sensor packages connected to your
PX3TS, the LCD display shows the message "No managed devices" for
the "Peripherals" menu command.
If you have enabled the front panel actuator control function, you can
switch on or off a connected actuator using the LCD display. See
Miscellaneous
(on page 402).
To show environmental sensor or actuator information:
1. Press or to select "Peripherals" in the Main Menu, and
press .
2. The display shows a list of environmental sensors/actuators.

If the desired sensor or actuator is not visible, press or
to scroll up or down.

When the list exceeds one page, the currently-selected
sensor/actuator's ID number and total of managed
sensors/actuators are indicated in the top-right corner of the
display.