Raritan PX3TS, User Manual

Page: 40 / 842

Chapter 3: Initial Installation and Configuration
16
You can connect either Ethernet port of an iX7
™
device to the LAN, but the
"green" port labeled "ETH 10/100/1000" is highly recommended
because it supports 1000 Mbps. You can also connect both Ethernet ports
to the LAN. See
Dual Ethernet Connection (for iX7
™
Only) (on page 18).
Below illustrates the ETHERNET port(s) on different product
models.

PX3TS models:

PX3TS-iX7 models:
Warning: Accidentally plugging an RS-232 RJ-45 connector into the
ETHERNET port can cause permanent damages to the Ethernet
hardware.
To make a wireless connection:
Do one of the following:

Plug a supported USB wireless LAN adapter into the USB-A port
on your PX3TS.

Connect a USB hub to the USB-A port on the PX3TS. Then plug
the supported USB wireless LAN adapter into the appropriate
USB port on the hub.
See USB Wireless LAN Adapters (on page 17) for a list of supported
wireless LAN adapters.