Raritan PX3TS, User Manual

Page: 589 / 842

Chapter 8: Using the Command Line Interface
565
config:# security roleBasedAccessControl ipv6 rule modify <rule_number>
startIpAddress <start_ip> endIpAddress <end_ip> role <role> policy <policy>
Variables:

<rule_number> is the number of the existing rule that you want to
modify.

<start_ip> is the starting IP address.

<end_ip> is the ending IP address.

<role> is one of the existing roles.

<policy> is one of the options:
allow or deny.
Policy Description
allow Accepts traffic from the specified IP address
range when the user is a member of the specified
role
deny Drops traffic from the specified IP address range
when the user is a member of the specified role
Deleting a Role-Based Access Control Rule
These commands remove a specific rule from the list.
IPv4 commands
config:# security roleBasedAccessControl ipv4 rule delete <rule_number>
IPv6 commands
config:# security roleBasedAccessControl ipv6 rule delete <rule_number>
Variables:

<rule_number> is the number of the existing rule that you want to
remove.