Raritan PX3TS, User Manual

Page: 550 / 842

Chapter 8: Using the Command Line Interface
526
Changing the LAN Duplex Mode
This command determines the LAN interface duplex mode.
config:#
network ethernet <ETH> duplexMode <mode>
Variables:

<ETH> is one of the options -- ethernet, eth1, or eth2, which depends
on your model.
Option Description
ethernet
(PX3TS) ETHERNET port of the PX3TS model.
eth1
(PX3TS-iX7)
ETH1 port of the iX7
™
model.
eth2
(PX3TS-iX7)
ETH2 port of the iX7
™
model.

<mode> is one of the modes:
auto, half or full.
Option Description
auto The PX3TS selects the optimum transmission
mode through auto-negotiation.
half Half duplex:
Data is transmitted in one direction (to or from
the PX3TS device) at a time.
full Full duplex:
Data is transmitted in both directions
simultaneously.