Raritan PX3TS, User Manual

Page: 175 / 842

Chapter 6: Using the Web Interface
151
Number Section Information shown
Transfer Switch
Status of the inlet transfer switch.
See Dashboard - Transfer Switch (on page 152).
Inlet 1/2
Overview of both inlets' power data.
See Dashboard - Inlet 1/2 (on page 153).
Alerted
Sensors

When no sensors enter the alarmed state, this section shows
the message "No Alerted Sensors."

When any sensor enters the alarmed state, this section lists all
of them.
See
Dashboard - Alerted Sensors
(on page 154).
Alarms
This section can show data only after you have set event rules
requiring users to take the acknowledgment action.

When there are no unacknowledged events, this section shows
the message "No Alarms."

When there are unacknowledged events, this section lists all of
them.
See
Dashboard - Alarms
(on page 159).
Inlet History
The chart of the inlet's active power history is displayed by default.
You can make it show a different data type.
See
Dashboard - Inlet History
(on page 156).
Overcurrent
Protectors
This section is available only when your PX3TS contains
overcurrent protectors (OCPs).

Overview of each OCP's status

A current bar per OCP, which changes colors to indicate the
RMS current state
- green: normal
- yellow: warning
- red: critical
See Dashboard - OCP (on page 161).
Note that the Overcurrent Protectors section shows information of
the circuit breakers for protecting outlets, NOT the fuses for
protecting the inlet transfer switch.