DL4300 Appliance
Start-HypervExport
480
Command Options
The following table describes the options available for the
Start-HypervExport
command:
Table 238. Start-HypervExport command options
Option
Description
-?
Display this help message.
-core
Optional. Remote Core host machine IP address
(with an optional port number). By default the
connection is made to the Core installed on the local
machine.
-user
Optional. User name for the remote Core host
machine. If you specify a user name, you also have
to provide a password. If none are provided, then the
logged-on user's credentials will be used.
-password
Optional. Password to the remote Core host
machine. If you specify a password, you also have to
provide a user name. If none are provided, then the
logged-on user's credentials will be used.
-protectedserver
Protected machine with recovery points to be
exported.
-volumes
Optional. List of volume names to be exported. If
not specified, all volumes in the specified recovery
points will be exported. Values must be enclosed in
double quotes, each separated by a space. do not
use trailing slashes in volume names. For example,
specify “C:” not “C:/”
-rpn
Optional. The sequential number of a recovery
point to be exported. (You can use the
Get-
RecoveryPoints
command to obtain recovery
point numbers.
NOTE:
If neither ‘time’ nor ‘rpn’ option is
specified in this command, than the most
recent recovery point will be exported.
-time
Optional. Determines recovery point to be selected
for export. You need to specify exact time in the
format “MM/DD/YYYY hh:mm tt” (for example:
“04/24/2015 09:00 AM”).” Specify date time values of
the time zone set on your local machine.
NOTE:
If neither ‘time’ nor ‘rpn’ option is
specified in this command, than the most
recent recovery point will be exported.
-vmname
Windows name of the virtual machine.
