DL4300 Appliance
Configuring Replay engine settings
58
Setting
Description
C:\ProgramData\AppRecovery
\RepositoryMetaData\SecondaryCache
Cache metadata location
If you want to change the cache metadata location
for DVM repositories, then in the Cache Metadata
Location text box, type the path for a storage
location accessible to the Core.
The default location is:
C:\ProgramData\AppRecovery
\RepositoryMetaData\CacheMetadata
Deduplication cache size (GB)
If you want to change the deduplication cache size
for DVM repositories, then in the Deduplication
Cache Size text box, enter a new amount (in GB).
The default location is:
C:\ProgramData\AppRecovery
\RepositoryMetaData\SecondaryCache
The minimum cache size setting is 1.5GB.
Additionally, the cache size cannot exceed 50
percent of the installed RAM.
6.
For each setting, when satisfied with your changes, click
to save the change and exit edit mode, or
click
to exit edit mode without saving.
Parent topic
Configuring Replay engine settings
You can configure information regarding the Replay engine, which is the communication channel for Rapid
Recovery. These settings determine Core settings to provide effective communication.
In general, Dell recommends using default settings. In some cases, you may be directed by Dell Support to
modify these settings to help adjust the performance specific to your network needs.
Complete the steps in this procedure to configure Replay engine settings.
1. Navigate to the Rapid Recovery Core Console.
2.
On the icon bar, click
(Settings), and then do one of the following:
•
From the list of Core settings on the left side of the Settings page, click Replay Engine.
•
Scroll down on the right side of the Settings page until you can see the Replay Engine heading.
The Replay Engine core settings appear.
3. Click on the setting you want to change.
The setting you selected becomes editable.
4. Enter the configuration information as described in the following table.
