DL4300 Appliance
Repairing your Appliance
161
The updated versions of the Windows Server Roles and Features, .Net 4.5.2, LSI Provider, DL Applications,
OpenManage Server Administrator and Rapid Recovery Core Software are installed as part of the Recovery
and Update Utility. In addition to these, the Recovery and Update Utility also updates the RASR content.
NOTE:
If you are currently using any of the AppAssure Core versions, Rapid Recovery Core version
6.0.2.144 or earlier, RUU forces an update to the most recent version available in the Payload. It is
not possible to skip the update and this update is not revertible. If you do not want to upgrade the
Core software, do not run the RUU.
7. If prompted, reboot your system.
8. After all services and applications are installed, click Proceed.
The Core Console launches.
Parent topic
Repairing your Appliance
To repair your appliance:
1. Go to the License Portal under the Downloads section or go to support.dell.com and download the RUU
installer.
2. Copy the utility to the appliance desktop and extract the files.
3. Double-click the launchRUU icon.
4. When prompted, click Yes to acknowledge that you are not running any of the listed processes.
5. When the Recovery and Update Utility screen displays, click Start.
6. When prompted to reboot, click OK.
The updated versions of the Windows Server Roles and Features,.Net 4.5.2, LSI Provider, DL Applications,
OpenManage Server Administrator and Rapid Recovery Core Software are installed as part of the Recovery
and Update Utility.
7. If the bundled version in the utility is the same as the installed version, the Recovery and Update Utility
prompts you to confirm that you want to run a repair installation. This step can be skipped if a repair install
of the Rapid Recovery Core is not needed.
8. If the bundled version in the utility is higher than the installed version, then the Recovery and Update Utility
prompts you to confirm that you want to upgrade the Rapid Recovery Core software.
NOTE:
Rapid Recovery Core software downgrades are not supported.
9. If prompted, reboot your system.
10. After all services and applications are installed, click Proceed.
DL Appliance Configuration Wizard will be launched if the system needs to be configured again after repair,
otherwise Core Console will be launched.
Parent topic
