![background image](http://html1.mh-extra.com/html/quest-engineering/dl4300/dl4300_user-manual_3648779257.webp)
DL4300 Appliance
Exporting data to an ESXi virtual machine
257
Column
Description
Destination
The virtual machine and path to which data is being
exported.
Export Type
The type of virtual machine platform for the export,
such as ESXi, VMware, Hyper-V, or VirtualBox.
Schedule Type
The type of export as either One-time or Continuous.
Status
The progress of the export, displayed as a
percentage in a progress bar.
2. To manage saved export settings, select an export, and then click one of the following:
•
Edit. Opens the Virtual Machine Export Wizard to the VM Options page. Here you can change the location of the
exported VM, change the version of the VM type, or specify RAM or processors for the export. To immediately start
the VM export, select Perform initial one-time export.
•
Force. Forces a new export. This option could be helpful when virtual standby is paused and then resumed, which
means the export job will restart only after a new transfer. If you do not want to wait for the new transfer, you could
force an export.
•
Pause. Pauses an active export.
•
Resume. Resumes the requirement for continue export at the next scheduled or forced snapshot.
3. To remove an export from the system, select the export, and then click Remove.
The export configuration is permanently removed from the system. Removing the virtual standby
configuration does not remove any virtual machine exported as a result of the configuration.
4. To manage the number of exports that run at the same time, do the following:
•
Under Export Queue, click Settings.
•
In the Maximum Concurrent Exports dialog box, enter the number of exports you want to run simultaneously. The
default number is 5.
•
Click Save.
5. To cancel a one-time or continual export currently listed in the Export Queue, select the export, and then
click Cancel.
6. To add a new virtual standby export, you can click Add to launch the Export Wizard. For further information
about setting up virtual standby for a specific virtual machine, see one of the following topics:
•
Exporting data to an ESXi virtual machine
•
Exporting data to a VMware Workstation virtual machine
•
Exporting data to a Hyper-V virtual machine
•
Exporting data to a VirtualBox virtual machine
Parent topic
Exporting data to an ESXi virtual machine
In Rapid Recovery, you can export data to ESXi by performing a one-time export, or by establishing a continual
export (for virtual standby). Complete the steps in the following procedures for the appropriate type of export.