![background image](http://html1.mh-extra.com/html/quest-engineering/dl4300/dl4300_user-manual_3648779308.webp)
DL4300 Appliance
Monitoring replication
308
Item
Description
Add all Agents to Seed Drive
Select this option to replicate all protected machines
on the source core using the seed drive. This option
is selected by default.
Build recovery point chains (fix orphans)
Select this option to replicate the entire recovery
point chain to the seed drive. This option is selected
by default.
NOTE:
Typical seeding in Rapid Recovery
5.4.x replicated only the latest recovery point
to the seed drive, which reduced the amount
of time and space required for creating the
seed drive. Opting to build recovery point
chains to the seed drive requires enough
space on the seed drive to store the latest
recovery points from the specified protected
machines, and may take additional time to
complete the task.
9. Do one of the following:
•
If you cleared the Add all Agents to Seed Drive check box, click Next.
•
If you selected Add all Agents to Seed Drive, go to
.
10. On the Protected Machines page of the wizard, select the protected machines for which you want to create
a seed drive.
11. Click Finish.
Parent topic
Monitoring replication
When replication is set up, you can monitor the status of replication tasks for the source and target Cores. You
can refresh status information, view replication details, and more.
1. On the source Core, open the Rapid Recovery Core Console, and from the icon bar, click (Replication).
The Replication page appears.
2. On this page, you can view information about and monitor the status of replication tasks as described in the
following table.
Table 144. Replication tasks
Section
Description
Available Actions
Seed Drives (#)
After you specify the use of
a seed drive when defining
replication, until you abandon or
consume it, a Seed Drives (#)
link appears on the Outgoing
Replication pane on the source
Core. The number displayed
indicates how many seed drives
are pending.
NOTE:
This link does not
appear unless a seed drive
is pending.
In the drop-do, click Abandon
to abandon or cancel the seed
process. wn menu