DL4300 Appliance
Exporting data to a VirtualBox virtual machine
262
NOTE:
VirtualBox export of a Windows 10 protected machine is not currently supported.
Complete the steps in the following procedures for the appropriate type of export.
NOTE:
To perform this type of export, you should have VirtualBox installed on the Core machine. Virtual
Box Version 4.2.18 or higher is supported for Windows hosts.
Parent topic
Performing a one-time VirtualBox export
Complete the steps in this procedure to perform a one-time export to VirtualBox.
1. In the Rapid Recovery Core Console, in the button bar, click the Restore drop-down menu, click VM Export.
2. In the Virtual Machine Export Wizard, select One-time Export.
3. Click Next.
4. On the Machines page, select the protected machine that you want to export.
5. Click Next.
6. On the Recovery Points page, select the recovery point that you want to use for the export.
7. Click Next.
8. On the Destination page in the Export Wizard, in the Recover to Virtual machine drop-down menu, select
VirtualBox, and then click Next.
9. On the Virtual Machine Options page, select Use Windows machine.
10. Enter the parameters for accessing the virtual machine as described in the following table.
Table 119. Virtual machine parameters
Option
Description
Virtual Machine Name
Enter a name for the virtual machine being created.
NOTE:
The default name is the name of the
source machine.
Target Path
Specify a local or remote target path to create the
virtual machine.
NOTE:
The target path should not be a root
directory.
If you specify a network share path, you
will need to enter valid logon credentials
(user name and password) for an account
that is registered on the target machine.
The account must have read and write
permissions to the network share.
Memory
Specify the memory usage for the virtual machine by
clicking one of the following:
•
Use the same amount of RAM as source machine
•
Use a specific amount of RAM, and then specify the
amount in MB