manualshive.com logo in svg

Quest Engineering DL4300, User Manual

Share
Download
Quest Engineering DL4300 User Manual Download Page 290

DL4300 Appliance

Replicating to a self-managed target Core

290

Item

Description

Recycle action

In the event the path already contains a seed drive,

select one of the following options:

•

Do not reuse. Does not overwrite or clear any

existing seed data from the location. If the location

is not empty, the seed drive write will fail.

•

Replace this Core. Overwrites any pre-existing seed

data pertaining to this core but leaves the data for

other cores intact.

•

Erase completely. Clears all seed data from the

directory before writing the seed drive.

Comment

Enter a comment that describes the seed drive.

Add all Agents to Seed Drive

Select this option to replicate all protected machines

on the source core using the seed drive. This option

is selected by default.

Build recovery point chains (fix orphans)

Select this option to replicate the entire recovery

point chain to the seed drive. This option is selected

by default.

 

NOTE: 

Typical seeding in AppAssure 5.4

replicated only the latest recovery point to

the seed drive, which reduced the amount

of time and space required for creating

the seed drive. Opting to build recovery

point (RP) chains to the seed drive requires

enough space on the seed drive to store

the latest recovery points from the specified

protected machine or machines, and may

take additional time to complete the task.

g. Do one of the following:

▪

If you cleared the Add all Agents to Seed Drive check box, click Next.

▪

If you selected Add all Agents to Seed Drive, go to Step 10.

h. On the Protected Machines page of the Replication Wizard, select the protected machines you

want to replicate to the target Core using the seed drive.

10. Click Finish.
11. If you created a seed drive, send it to your target Core.

The pairing of the source Core to the target Core is complete.

Unless you selected the option to initially pause replication, the replication process begins immediately.

1. If you selected the option to use a seed drive, replication produces orphaned recovery points on the target

Core until the seed drive is consumed and provides the necessary base images.

2. If you specified the use of the a drive, transfer the seed drive archive file to a volume (shared folder, virtual

disk, or removable storage media). Then, consume the seed drive.

Parent topic  

Summary of Contents for DL4300





























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands