manualshive.com logo in svg

Quest Engineering DL4300, User Manual

Share
Download
Quest Engineering DL4300 User Manual Download Page 170

DL4300 Appliance

Deploying the Rapid Recovery Agent software to one or more machines

170

 

NOTE: 

Enter one machine on each line.

10. Click Finish.

The system automatically verifies each machine that you selected.
If Rapid Recovery detects any concerns during automatic verification, the wizard progresses to a Warnings

page, where you can clear machines from selection and manually verify the selected machines. If the

machines you added pass the automatic verification, they appear on the Deploy Agent to Machines pane.

11. If the Warning page appeared and you are still satisfied with your selections, click Finish again.

The Rapid Recovery Agent software deploys to the specified machines. The machines are not yet protected.

Protection begins after you complete 

Protecting multiple machines on a VMware vCenter/ESX(i) virtual host

.

Parent topic  

Deploying an upgrade of the Rapid Recovery Agent software to protected machines

You can use the Deploy Agent Software Wizard to push an upgrade of the Rapid Recovery Agent software to

machines that are already protected by the local Rapid Recovery Core.

1. On the Rapid Recovery Core Console, click the Protect drop-down menu, and then click Deploy Agent

Software.
The Deploy Agent Software Wizard opens.

2. On the Connection page of the wizard, from the Source drop-down list, select Local Core.
3. Click Next.
4. On the Machines page of the wizard, select the protected machines to which you want to deploy an

upgrade of the Rapid Recovery Agent software.

5. Click Finish.

The system automatically verifies each machine that you selected.
If Rapid Recovery detects any concerns during automatic verification, the wizard progresses to a Warnings

page, where you can clear machines from selection and manually verify the selected machines. If the

machines you added pass the automatic verification, they appear on the Deploy Agent to Machines pane.

6. If the Warning page appeared, and you are still satisfied with your selections, click Finish again.

Parent topic  

Deploying to machines manually

Use the following procedure to deploy the Rapid Recovery Agent to multiple machines on any type of host other

than the local Core, Active Directory, or vCenter/ESXi.

1. On the Rapid Recovery Core Console, click the Protect drop-down menu, and then select Deploy Agent

Software.
The Deploy Agent Software Wizard opens.

2. On the Connection page of the wizard, from the Source drop-down list, select Manually.
3. Click Next.
4. On the Machines page of the wizard, enter the machine details in the dialog box in the format

hostname::username::password::port

. Examples include:

10.255.255.255::administrator::&11@yYz90z::8006

abc-host-00-1::administrator::99!zU$o83r::168

5. If you want to restart the machines automatically after deployment, select After Agent installation, restart the

machines automatically (Recommended).

6. Click Finish.

The system automatically verifies each machine that you selected.

Summary of Contents for DL4300





























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands