![background image](http://html1.mh-extra.com/html/quest-engineering/dl4300/dl4300_user-manual_3648779171.webp)
DL4300 Appliance
Modifying deploy settings
171
If Rapid Recovery detects any concerns during automatic verification, the wizard progresses to a Warnings
page, where you can clear machines from selection and manually verify the selected machines. If the
machines you added pass the automatic verification, they appear on the Deploy Agent to Machines pane.
7. If the Warning page appeared, and you are still satisfied with your selections, click Finish again.
The Rapid Recovery Agent software deploys to the specified machines. The machines are not yet protected.
Protection begins after you complete
Protecting multiple machines manually
Parent topic
Verifying the deployment to multiple machines
Once you have deployed the Rapid Recovery Agent software to two or more machines simultaneously, you can
verify the success by viewing each machine listed under the Protected Machines menu.
You can also view information regarding the bulk deploy process from the Events page. Complete the steps in this
procedure to verify the deployment.
1.
Navigate to the Rapid Recovery Core Console, click
(Events), and then click Alerts.
Alert events appear in the list, showing the time the event initiated and a message. For each successful
deployment of the Agent software, you will see an alert indicating that the protected machine has been
added.
2. Optionally, click on any link for a protected machine.
The Summary page for the selected machine appears, showing pertinent information including:
•
The host name of the protected machine
•
The last snapshot, if applicable
•
The time of the next scheduled snapshot, based on the protection schedule for the selected machine
•
The encryption key, if any, used for this protected machine.
•
The version of the Agent software.
Parent topic
Modifying deploy settings
Complete the steps in this procedure to modify deploy settings.
1.
From the Rapid Recovery Core Console, click
(Settings).
2. On the Settings page, in the left column, click Deploy to navigate to the Deploy section.
3. Modify any of the following options by clicking the setting you want to change to make it editable as a text
box or drop-down list, and then click
to save the setting.
Table 60. Deploy options
Option
Description
Agent Installer Name
Enter the name of the agent executable file. The
default is Agent-web.exe.
Core Address
Enter the address for the Core.
Failed Receive Timeout
Enter the number of minutes to wait without activity
before timeout.