DL4300 Appliance
Exporting data to a VirtualBox virtual machine
264
Table 120. Remote Linux machine settings
Option
Description
VirtualBox Host Name
Enter an IP address or host name for the VirtualBox
server. This field represents the IP address or host
name of the remote VirtualBox server.
Port
Enter a port number for the machine. This number
represents the port through which the Core
communicates with this machine.
Virtual Machine Name
Enter a name for the virtual machine being created.
NOTE:
The default name is the name of the
source machine.
Target Path
Specify a target path to create the virtual machine.
NOTE:
It is recommended that you create
a root folder from root so that the virtual
machine runs from root. If you do not use
root, you will need to create the destination
folder manually on the target machine prior
to setting up the export. You will also need to
manually attach or load the virtual machine
after the export.
User Name
User name of the account on the target machine, for
example, root.
Password
Password for the user account on the target
machine.
Memory
Specify the memory usage for the virtual machine by
clicking one of the following:
•
Use the same amount of RAM as source machine
•
Use a specific amount of RAM, and then specify the
amount in MB
The minimum amount is 1024
MB and the maximum allowed by
the application is 65536 MB. The
maximum amount of memory usage
is limited by the amount of RAM
available to the host machine.
9. Select Perform initial one-time export to perform the virtual export immediately instead of after the next
scheduled snapshot.
10. Click Next.
11. On the Volumes page, select the volumes of data to export, and then click Next.
12. On the Summary page, click Finish to complete the wizard and to start the export.
NOTE:
You can monitor the status and progress of the export by viewing the Virtual Standby or
Events pages.
