![background image](http://html1.mh-extra.com/html/quest-engineering/dl4300/dl4300_user-manual_3648779444.webp)
DL4300 Appliance
New-Base
444
Example:
Lists all volumes on the specified machine:
>Get-Volumes -protectedserver 10.10.10.10
Parent topic
New-Base
The
New-Base
command forces a new base image resulting in a data transfer for the current protected machine.
When you force a base image, the transfer will start immediately or will be added to the queue. Only the data that
has changed from a previous recovery point will be transferred. If there is no previous recovery point, all data on
the protected volumes will be transferred.
Usage
The usage for the command is as follows:
New-Base [[-all] | -protectedserver [machine name]] -core [host name] -user [user name] -password [password]
Command Options
The following table describes the options available for the
New-Base
command:
Table 209. New-Base command options
Option
Description
-?
Display this help message.
-all
Base image for all agents.
-core
Optional. Remote Core host machine IP address
(with an optional port number). By default the
connection is made to the Core installed on the local
machine.
-password
Optional. Password to the remote Core host
machine. If you specify a password, you also have to
provide a user name. If none are provided, then the
logged-on user's credentials will be used.
-protectedserver
Force for the current protected machine’s name.
-user
Optional. User name for the remote Core host
machine. If you specify a user name, you also have
to provide a password. If none are provided, then the
logged-on user's credentials will be used.
Example:
Force base image for all protected machines:
>New-Base –all
Parent topic