DL4300 Appliance
Deploying the Rapid Recovery Agent software to one or more machines
168
NOTE:
The target machines must have internet access to download and install bits, because Rapid
Recovery uses the web version of the Rapid Recovery Agent Installer to deploy the installation
components. If internet access is unavailable, use the Core Console to download the installer to a medium,
such as a USB drive, and then physically install the software on the machines that you want to protect. For
Downloading the Rapid Recovery Agent Installer
.
Parent topic
Deploying to machines on an Active Directory domain
Use this procedure to simultaneously deploy the Rapid Recovery Agent software to one or more machines on an
Active Directory domain.
Before you begin this procedure, have the domain information and logon credentials
for the Active Directory server on hand.
1. On the Rapid Recovery Core Console, click the Protect drop-down menu, and then click Deploy Agent
Software.
The Deploy Agent Software Wizard opens.
2. On the Connection page of the wizard, from the Source drop-down list, select Active Directory.
3. Enter the domain information and logon credentials as described in the following table.
Table 58. Domain information and credentials
Text Box
Description
Host
The host name or IP address of the Active Directory
domain.
User name
The user name used to connect to the domain; for
example, Administrator or, if the machine is in a
domain, [domain name]\Administrator).
Password
The secure password used to connect to the
domain.
4. Click Next.
5. On the Machines page, select the machines to which you want to deploy the Rapid Recovery Agent
software.
6. Optionally, to automatically restart the protected machines after the Agent is installed, select After Agent
installation, restart the machines automatically (Recommended).
7. Click Finish.
The system automatically verifies each machine that you selected.
If Rapid Recovery detects any concerns during automatic verification, the wizard progresses to a Warnings
page, where you can clear machines from selection and manually verify the selected machines. If the
machines you added pass the automatic verification, they appear on the Deploy Agent to Machines pane.
8. If the Warning page appeared and you are still satisfied with your selections, click Finish again.
The Rapid Recovery Agent software deploys to the specified machines. The machines are not yet protected.
Protection begins after you complete
Protecting multiple machines on an Active Directory domain
Parent topic
