DL4300 Appliance
Changing target Core settings
312
Option
Description
Volume image session timeout (minutes)
Specify the amount of time the source Core spends
attempting to transfer a volume image to the target
Core.
Maximum parallel streams
Specify the number of network connections
permitted to be used by a single protected machine
to replicate that machine’s data at one time.
Maximum transfer speed (MB/s)
Specify the speed limit for transferring the replicated
data.
Maximum transfer data size (GB)
Specify the maximum size in GB for transferring
blocks of replicated data.
Restore Defaults
Select this option to change all replication settings to
the system defaults.
NOTE:
Take note of any customized settings
before selecting this option. You will not be
prompted to confirm this action
4. When satisfied, click Save to save the replication settings and close the dialog box.
Parent topic
Changing target Core settings
You can change the host and port settings for individual target Cores from the source Core.
1. On the source Core, open the Rapid Recovery Core Console, and from the icon bar, click (Replication).
The Replication page appears.
In the Outgoing Replication pane, the summary table includes a row for each target Core that has been
configured to replicate recovery points from this source Core.
2. Click the (Settings) drop-down menu for the target Core you want to modify, and then select Change
Settings.
The Settings dialog box appears.
3. Edit any of the options described in the following table.
Table 146. Target Core settings
Option
Description
Host
Enter the host for the target Core.
Port
Enter a port for the target Core to use for
communication with the source Core.
NOTE:
The default port is 8006.
4. Click Save.
Parent topic
