DL4300 Appliance
Start-HypervExport
479
Option
Description
-vmname
Windows name of the virtual machine.
-hostname
The virtual server host name.
-hostport
The virtual server port number.
-hostusername
The user name to the virtual server host.
-hostpassword
The password to the virtual server host.
-ram
Allocate specific amount of RAM on the virtual
server.
-usesourceram
Optional. Allocate the same amount of RAM on the
virtual server as the source protected machine.
-diskprovisioning
Optional. The amount of disk space that will be
allocated on the virtual machine. Specify ‘thick’ to
make the virtual disk as large as the original drive on
the protected server, or ‘thin’ to allocate the amount
of actual disk space occupied on the original drive,
plus some extra space in megabytes.
By default, ‘thin’ provisioning is selected.
-diskmapping
Optional. Select either ‘auto,’ ‘manual,’ or ‘withvm’.
By default, auto-mapping is enabled.
-resetup
Optional. Recreates virtual machine if it is already
presented at the specified location.
-datacenter
Optional. Specifies which datacenter to use.
-resourcepool
Optional. Specifies which resource pool to use.
-datastore
Optional. Specifies which datastore to use.
-computeresource
Optional. Specifies which compute resource to use.
-version
Optional. Specifies which version of ESXi to use.
Parent topic
Start-HypervExport
The
Start-HypervExport
PowerShell command initiates the launch of a virtual export from the selected Rapid
Recovery recovery point to a Hyper-V server virtual machine.
Usage
The usage for the command is as follows:
Start-HypervExport -core [host name] -user [user name] -password [password] -protectedserver [[machine name] or [IP address]] -volumes [volume names] -rpn [number | numbers] | -time [time string] [-vmname [uselocalmachine] | -hostname [virtual host name] -hostport [virtual host port number] -hostusername [virtual host user name] -hostpassword [virtual host password] -vmlocation [location]] [-ram [total megabytes] | -usesourceram] -diskformat [VHD | VHDX]
